Mitsubishi Rosa Mitsubishi Rosa MITSUBISHI ROSA DIESEL 4.2L 34 SET 2024

Mitsubishi Rosa MITSUBISHI ROSA DIESEL 4.2L 34 SET 2024ENGINE
Model Mitsubishi 4D33-7A
Type 4 stroke-cycle, water-cooled direct
injection diesel engine.
Number of cylinder 4 in line.
Bore and stroke 108 mm × 115 mm
Piston displacement 4,214 cc
Max. output (EC Net) 80kW / 3,000 rpm
Max. torque (EC Net) 304N･m / 1,600 rpm
Generator 24 Volt, AC 80 Amp.
Air cleaner Dry type with paper element.
Engine Equipment: Exhaust Brake.
Remarks:
Rated output guaranteed within 5%.
CLUTCH Hydraulic control, single dry plate,
pedal power booster
Model C4W30
TRANSMISSION
Model M035S5
Type 5 forward and 1 reverse speed
1st to 5th ,Rev ; Synchromesh gears
Ratio 5.380 –
Rev. 5.380
PROPELLER SHAFT
Model P3
FRONT AXLE Reverse Elliot, ”I” beam type.
REAR AXLE Full floating type
Final reduction Model D2H
Ratio 5.714
Single reduction, hypoid gear
4/8
Spec. No. BE6-0556
TIRES AND WHEELS Single front, dual rear
Tire size (Wheel size)
Front 7.00R16-12PRLT (16×5.5:silver)
Rear 7.00R16-12PRLT (16×5.5:silver)
STEERING Left hand steering.
Ball nut type with integral type hydraulic ,
power booster tilt steering column.
SUSPENSIONS
Front Parabolic, laminated leaf springs with
shock absorbers and stabilizer.
Rear Parabolic, laminated leaf springs with
shock absorbers and stabilizer.
BRAKES
Service Hydraulic with vacuum servo assistance
Front brake Drum brake.
Rear brake Drum brake.
Parking Internal expanding type at rear side
of transmission.
Auxiliary Exhaust brake
COOLING SYSTEM
Radiator Corrugated fin type and condense tank.
FRAME
Type Parallel tapered channel section type with
reinforcement and cross-members.
Material Hot rolled steel.
ELECTRICAL SYSTEM 24 Volt
Batteries 12 Volt×2, 55D26R 48Ah at 5hr rate.
FUEL TANK 100 liters.
WATER SEPARATOR Primary fuel filter in fuel line.
CAUTION PLATE Arabic
MEASUREMENT Metric (km/h)
5/8
Spec. No. BE6-0556
MISCELLANEOUS
The standard equipments are as follows.
1) Spare tire and wheel.
2) Standard tool set including hydraulic jack. Without wheel stoppers.
3) Spin-on type oil filter.
4) Touch up paint.
NOTE
1. 2. Empty vehicle weight shown is subjected to 3.5% variation to allow for
production tolerance.
Empty vehicle weight includes weight of oil, fuel, water and spare tire
carrier & bracket ,spare tire & disk wheel and standard tool set.
6/8
Spec. No. BE6-0556
BODY SPECIFICATION (MODEL BE637JLMDADC)
TYPE Semi-integral (monocoque) type.
BODY STRUCTURE Pressed steel girder construction of pillars
with spot welded outside panels and roof panels.
WINDOWS
Front Upper tinted laminated safety heat absorbing
green glass.
Side Sash & Slide type.
Sash color : Silver.
Heat absorbing green glass.
Rear Heat absorbing green glass.
SEATS
Seating capacity Seat arrangement See drawing.
Passengers’ seat 32 passengers and 1 crew.
High back type, fixed seat, covered with knit.
Driver’s seat Adjustable in horizontal direction and ,
seat back angle foam rubber cushion and ,
headrest covered with knit.
Auxiliary seat With.
SEAT BELTS
Driver ELR 3 points type.
Assistant 2 points fixed type.
Passenger 2 points fixed type.
INTERIOR EQUIPMENT
Room mirror Sun visor Door pocket Ashtray
for driver With.
for passenger Without.
One interior rear view mirror.
For driver and assistant.
Provided on the driver’s door.
7/8
Spec. No. BE6-0556
EXTERIOR EQUIPMENT
Front & Rear bumpers Pressed steel, painted bumpers.
Rear view mirrors Two rear view mirrors on both side of front end.
Rear under view mirror Without.
Spare tire carrier Wind-up type, under the rear overhang.
Towing hooks One piece, at the front frame.
ELECTRICAL EQUIPMENT
Horn Single, electric type.
Windshield wipers and washers
Dual blades, tank 2.7 liters.
DOORS
Entrance & exit Vacuum type auto, Hinged inward, folding type.
STEP WELL Non-slip checkered steel plate.
LIGHTING EQUIPMENT
Room lamps Step lamp Head lamps 3 incandescent lamps of 12WX2.
located over aisle.
12W located on rear wall of front step and ,
front wall of rear step.
Halogen lamps, multi-parabolic type.